You are here: » Our Products » Rope Blowing Equipment
Rope Blowing Technique
The rope ① will be blown-in directly from the storage drum ② into the duct ③.
A blowing-in piston ④ at the beginning of the rope will be forced through the pipe by compressed air of a compressor ⑤.
The pipe is sealed by a sealing plug ⑥ with rope-slit.
The capstan drive ⑦ of the rope reel ⑧ will be used for pulling the rope back to the starter manhole.
Rope Blowing Equipment
Duct-Bore Sealing Plug
with lateral-slit guide for insertion of the rope
- equipped with lateral-slit rope guide for insertion of the rope
- for ropes and ducts of different diameters
- suitable for ropes with thimbles too
- other sizes on request
For Internal Duct diameter | for Rope Diameter | Order No. | |
---|---|---|---|
98 - 102 mm | 4 mm | 27160 | Request |
98 - 102 mm | 5 mm | 45126 | Request |
98 - 102 mm | 5,5 mm | 52434 | Request |
98 - 102 mm | 6 mm | 52436 | Request |
98 - 102 mm | 7,5 mm | 45128 | Request |
102 - 106 mm | 4 mm | 27161 | Request |
102 - 106 mm | 5 mm | 45127 | Request |
102 - 106 mm | 5,5 mm | 52435 | Request |
102 - 106 mm | 6 mm | 52437 | Request |
102 - 106 mm | 7,5 mm | 45129 | Request |